-
Daniel WereeHave been business relationship for 3 years, great partner for Nickel Cobalt Alloy!
-
Carolina FasioOn-time delivery. And support is good and fast.
ASTMA494 CY5SnBiM J26055 Nickel Cobalt Alloy Corrosion Bite Resistant
Equal Grades | J26055, ILLIUM Alloy 8 | Waukesha Alloy No. | WM88 |
---|---|---|---|
Form Of Supply | Casting Part, Round Bar | Product Name | Nickel Cobalt Alloy |
Package | Plywood Case | Brand | XUNSHI |
High Light | Anti Corrosion Nickel Cobalt Alloy,Bite Resistant Nickel Cobalt Alloy,CY5SnBiM |
ASTMA494 CY5SnBiM J26055 with Corrosion and Bite Resistant
CY5SnBiM is a corrosion-resistant and anti-bite nickel-based alloy material specifically used for rotor volume pumps, the corresponding standard is ASTMA494,and this material is listed in the 3-A hygiene standard as an acceptable surface contact material. Good corrosion resistance makes the alloy widely used in a variety of chemical media environments, and CY5SnBiM has excellent anti-bite property, CY5SnBiM also has a good processing performance. However, the defect of this alloy is no welding.
The Corrosion resistance, bite resistance and no wear properties make CY5SnBiM to be a good material for stainless steel volume pumps.
Chemical composition
C | Mn | Si | P | S | Mo | Fe | Ni | Cr | Bi | Sn |
0.05 max | 1.5 max | 0.5 max | 0.025 max | 0.025 max | 2.0-3.5 | 2.0 max | Rem | 11.0-14.0 | 3.0-5.0 | 3.0-5.0 |
Physical performance
Parameters /unit | Temperature °F | |
Density / g/cm^3 | Room temperature | 8.6 |
line expansion coefficient in/in/°Fx10^-6 |
32-500 32-1000 32-1500 |
8.01 8.88 9.88 |
Elastic modulus psi x 10 ^ 6 | Room temperature | 27.0 |
Heat conductivity (btu/ft ^ 2 / hr/ft) | 105 | 16.7 |
Resresistivity (microhm-cm) | 77 | 112.7 |
Magnetic performance | Room temperature | Not attracted to the magnets |
The CY5SnBiM corrosion resistance is similar to AISI300 series stainless steel.However,CY5SnBiM has limited tolerance to the certain corrosive chemicals commonly used to contact 300 series stainless steel. Do not use CY5SnBiM materials in nitric acid environments.
ASTM A494 CY5SnBiM(J26055) cannot be heat treated. It is used in the casting condition. We are experience in CY5SnBiM casting supply, and the products have been exported to Germany and other countries, which are recognized by international customers.