R30003 Co40CrNiMo Phynox Eligiloy Elastic Alloy Non-magnetic Cold Rolled Strip

August 30, 2022
Latest company news about R30003 Co40CrNiMo Phynox Eligiloy Elastic Alloy Non-magnetic Cold Rolled Strip

INTRODUCTION

R30003 is a Cobalt-Chrome-Nickel alloy which is capable of very high strength levels (330ksi) after cold forming and aging. This alloy is the material of choice for many medical applications due to its high fatigue resistance as well as being biocompatible, non-magnetic and suitable for implants.

 

 

Suzhou Xunshi New Material Co., Ltd (Xunshi) is specialized in manufacturing high-quantity alloys for 10+Years. With a company mission to provide high quality, reliable source for precision alloys, high temperature alloys and stainless steels in both pilot processing and mass production, we are specialized in manufacturing materials with unique features, which are then used in aerospace, military, electronics, marine, petroleum, and petrochemical industries.

Particularly our soft magnetic alloys, sealing alloys and elastic alloys strip are used by most of us in our everyday lives. Our motivated team uses its experience to continually develop the technical capabilities of Xunshi to become your supplier of choice of special alloys.

 

 

key feature

  • Combination of high strength, ductility, and good mechanical properties at ambient temperatures
  • Excellent fatigue life
  • Excellent corrosion resistance in numerous environments
  • Nonmagnetic
  • Age hardenable (Spring Temper only)
  • Good for sea water applications 

 

Table 2 Physical Properties

Density, g/cm3 8.3
Melting Point 1427
Resistivity,p/(μΩ•m) 0.99

 

Typical Mechanical Property of Solid material

Diameter

mm

Tensile Strength

Rm/Mpa

Yield Strength

Rp0.2/MPa

Elongation

A,(%)≥

DIA1.0 1921 1687 6.3
DIA1.65 1813 1578 3.5
DIA6.0 1070 840 43

 

Typical Mechanical Property of Strip material

Thickness

mm

Tensile Strength

Rm/Mpa

Yield Strength

Rp0.2/MPa

Elongation

A,(%)≥

Hardness

HV

T0.10 1398 1327 14.5 451
T0.127 1523 1285 4.0 466
T0.15 1555 1508 14.0 468
T0.30 967 484 66 273
T1.20 1611 1538 9.5 458
T1.60 1612 1466 8.5 447
T2.05 1556 1448 12.0 461

 

Material Application Examples

Co-Cr-Ni Alloy

Springs
Seal components
Medical devices
Components for watches
Aerospace applications
Petro-chemical applications
Marine engineering

 

 

Forms Of Supply

The Co-Cr-Ni Alloy (Phynox, Havar alloy) material are available in many shapes and dimensions, supplying semi-finished products in forms of strip, wire, plate & Rods.

The following table provides an overview of the availability of our material in the various forms of supply.

 

 

Co-Cr-Ni Alloy

Rod Strip Plate Wire
Dia.20 to 120(mm) Thickness0.1 to 2.5(mm) Thickness2.5 to 40.0(mm) Dai.0.1 to 7.0(mm)

 

 

Delivery state “Annealed” possible for strip

Strip forming delivery state in “Cold rolling” without Aged”

 

 

Co-Cr-Ni Alloy alloy with 40% of cobalt, are available in Hard or cold-rolled condition for strip. Rod in hot rolling or forging condition, plate in cold rolled or hot rolled or forging condition, wire in cold draw condition.

 

 

Chemical composition, Physical and Mechanical properties will be engineered according to specific customer requirements. Therefore, chemical composition, physical and mechanical properties might be different to values listed in this document.

 

Information about product characteristics or applicability of materials are shown only for informative purposes.