Daniel WereeHave been business relationship for 3 years, great partner for Nickel Cobalt Alloy!
Carolina FasioOn-time delivery. And support is good and fast.
Illium 8 Corrosion Resistance Nickel Cobalt Alloy Anti Bite
|Equal Grades||CY5SnBiM, J26055, Waukesha Alloy 88||Spec||ASTM A 494, Grade CY5SnBiM|
|Form Of Supply||Casting Parts||Model||ILLIUM 8|
|Brand||AIWEN||Product Name||Nickel Cobalt Alloy|
Anti Corrosion Nickel Cobalt Alloy,
Nickel Cobalt Alloy Anti Bite,
Illium 8 Nickel Cobalt Alloy
Illium 8 Corrosion Resistance And Anti-Bite Nickel Cobalt Alloy
ILLIUM 8 alloy is a corrosion resisting nickel-base alloy designed to operate in contact with stainless
steel without galling or seizing.
The alloy is a corrosion-resistant and anti-bite nickel-based alloy material specifically used for rotor volume pumps, the corresponding standard is ASTMA494 Grade CY5SnBiM (UNS 26055), and this material is listed in the 3-A hygiene standard as an acceptable surface contact material. Good corrosion resistance makes the alloy widely used in a variety of chemical media environments, and ILLIUM 8 has excellent anti-bite property, ILLIUM 8 also has a good processing performance. However, the defect of this alloy is no welding.
|0.05 max||1.5 max||0.5 max||0.025 max||0.025 max||2.0-3.5||2.0 max||Rem||11.0-14.0||3.0-5.0||3.0-5.0|
Non-galling or seizing
Corrosion resistance to a wide variety of chemicals
Excellent anti-bite property
|Parameters /unit||Temperature °F|
|Density / g/cm^3||Room temperature||8.6|
line expansion coefficient
|Elastic modulus psi x 10 ^ 6||Room temperature||27.0|
|Heat conductivity (btu/ft ^ 2 / hr/ft)||105||16.7|
|Magnetic performance||Room temperature||Not attracted to the magnets|
Rotor, casing, and impellers where food contact is required. Applications such as food pumps, scrapers, bushings, mixing components, meat grinders, dairy products, pharmaceutical, as well as other applications.
ILLIUM 8 alloy is soft; smaller processing chips.It has poor heat dissipation capacity and wears out the tool materials very quickly. Its processing characteristics are similar to cast iron: blade wear-out is the main way of tool failure. The difference between cast iron is that makes the tool wear faster, the surface processing should be lower than cast iron of similar hardness.
The Alloys cannot be welded, but can be welded in silver.
CY5SnBiM, J26055, Waukesha Alloy 88, UNS N26055
We are experience in ILLIUM8 casting supply, and the products have been exported to Germany and other countries, which are recognized by international customers.