S31673 Special Stainless Steel Cold Pulled BarΦ1.0-25mm Surgical Implants Use

Special Stainless Steel S31673 Cold Pulled BarΦ1.0-25mm Surgical Implants Use

Special Stainless Steel S31673 Cold Pulled BarΦ1.0~25mm Surgical Implants Use

Su Zhou XUNSHI New Material Co Ltd can provide cost-effective surgical implants 316LVM for domestic and foreign customers, and the stainless steel UNS S31673 can be produced in accordance with the national standard 4234.1-2017,American standard ASTM F138 or ISO5832-1 and other relevant specifications.

316LVM is a variety of grade 316 stainless steel produced by A-ONE ALLOY. 316LVM goes through a process of electric arc melting, followed by vacuum arc remelting that results in a highly uniform chemistry that contains a minimal amount of impurities. Due to its lack of contaminants and high resistance to corrosion, 316LVM is commonly used in temporary and permanent medical implants (sutures, surgical staples and bone pins) and body piercing jewelry.

316LVM goes through a process of electric arc melting, followed by vacuum arc remelting that results in a highly uniform chemistry that contains a minimal amount of impurities. Due to its lack of contaminants and high resistance to corrosion, 316LVM is commonly used in temporary and permanent medical implants (sutures, surgical staples and bone pins) and body piercing jewelry.

Characters:

High strength

High fatigue strength

Excellent microcleanliness

Excellent structural homogeneity

High surface finish

Good consistency

Applications

Fracture Fixation Devices

Bone Plates

Screws

Intramedullary Nails

Surgical Implant Devices

Surgical Instruments

Body piercing jewelry

Equal grades:

DIN X2CrNiMo18-15-3(Germany),1.4441(Germany),00Cr13Ni14Mo3 (China)

Forms can supply

Wire,Bar, Tube.Pipe, Strip

Cold puled bar: specification: Φ1.0~25mm, size tolerance: ± 0.01~±0.1mm;

Hot rolled bar: specification:Φ14~75mm, size tolerance::±0.15~±0.30mm；

Wire: specification: 0.4~1.2mm, size tolerance: ± 0.01~±0.02mm;

Pipe: The specifications shall be determined through negotiation

The supply of Bars is relatively stable, there is some stock, and the customization cycle is short, the MOQ is 50 kg.