Daniel WereeHave been business relationship for 3 years, great partner for Nickel Cobalt Alloy!
Carolina FasioOn-time delivery. And support is good and fast.
Anti Bite Nickel Cobalt Alloy ILLIUM8 ASTMA494 Grade CY5SnBiM UNS N26055
|Equal Grades||CY5SnBiM, J26055, Waukesha Alloy 88||Spec||ASTM A 494, Grade CY5SnBiM|
|Form Of Supply||Casting Parts||Model||ILLIUM 8|
|Brand||XUNSHI||Product Name||Nickel Cobalt Alloy|
Anti Bite Nickel Cobalt Alloy,
ASTM A 494 Nickel Cobalt Alloy,
Grade CY5SnBiM Nickel Cobalt Alloy
Bite Resistance Nicke Alloy ILLIUM8 ASTMA494 Grade CY5SnBiM UNS N26055
Anti-Bite Nicke Alloy ILLIUM8 ASTMA494 Grade CY5SnBiM UNS N26055
ILLIUM Alloy8 is a product of the company Stainless Foundry & Engineering,Inc, USA.
The alloy is a corrosion and bite resistantance nickel-based alloy material specifically used for rotor volume pumps, the corresponding standard is ASTMA494 Grade CY5SnBiM (UNS N26055), and this material is listed in the 3-A hygiene standard as an acceptable surface contact material. Good corrosion resistance makes the alloy widely used in a variety of chemical media environments, and ILLIUM 8 has excellent anti-bite property, ILLIUM 8 also has a good processing performance. However, the defect of this alloy is no welding.
The Corrosion resistance, bite resistance and no wear properties make ILLIUM 8 to be a good material for stainless steel volume pumps.
|0.05 max||1.5 max||0.5 max||0.025 max||0.025 max||2.0-3.5||2.0 max||Rem||11.0-14.0||3.0-5.0||3.0-5.0|
|Parameters /unit||Temperature °F|
|Density / g/cm^3||Room temperature||8.6|
line expansion coefficient
|Elastic modulus psi x 10 ^ 6||Room temperature||27.0|
|Heat conductivity (btu/ft ^ 2 / hr/ft)||105||16.7|
|Magnetic performance||Room temperature||Not attracted to the magnets|
Rotors, shells and impeller that required to contact with food, such as food pumps, scraper, shafts, bushes, mixing parts, meat grinder, dairy, pharmaceuticals, etc
ILLIUM 8 alloy is soft; smaller processing chips.It has poor heat dissipation capacity and wears out the tool materials very quickly. Its processing characteristics are similar to cast iron: blade wear-out is the main way of tool failure. The difference between cast iron is that makes the tool wear faster, the surface processing should be lower than cast iron of similar hardness.
The Alloys cannot be welded, but can be welded in silver.
ILLIUM8 alloys cannot be heat treated. It is used in the casting condition.
The ILLIUM8 corrosion resistance is similar to AISI300 series stainless steel. However, ILLIUM8 has limited tolerance to the certain corrosive chemicals commonly used to contact 300 series stainless steel. Do not use ILLIUM8 materials in nitric acid environments.
We are experience in ILLIUM8 casting supply, and the products have been exported to Germany and other countries, which are recognized by international customers.
CY5SnBiM, J26055, Waukesha Alloy 88, UNS N26055
If you are interesting in this alloy,please feel free to contact us.